SB

SINGLE CUT

DOUBLE CUT

DIAMOND CUT

NF CUT

ALUMINUM CUT

STEEL CUT

INOX CUT

SINGLE CUT

Code	Tip Dia	Tip Length	Shank Dia	OAL	Construction
AE 0312	3	15	3	38	Solid, Fig 1
AE 0414	4	15	6	65	Brazed, Fig 2
AE 0616 SC	6	15	6	50	Solid, Fig 1
AE 0820	8	20	6	70	Brazed, Fig 3
AE 1022	10	20	6	70	Brazed, Fig 3
AE 1224	12	20	6	70	Brazed, Fig 3
AE 1224	12	25	6	75	Brazed, Fig 3
AE 1640	16	25	6	75	Brazed, Fig 3

Single cut is a general purpose tool designed for cast iron, steel, some copper and brass, and other ferrous materials. It will give good material removal and good workpiece finish.

DOUBLE CUT

Code	Tip Dia	Tip Length	Shank Dia	OAL	Construction
AE 0312 DC	3	15	3	38	Solid, Fig 1
AE 0414 DC	4	15	6	65	Brazed, Fig 2
AE 0616 SC DC	6	15	6	50	Solid, Fig 1
AE 0820 DC	8	20	6	70	Brazed, Fig 3
AE 1022 DC	10	20	6	70	Brazed, Fig 3
AE 1224 DC	12	20	6	70	Brazed, Fig 3
AE 1224 DC	12	25	6	75	Brazed, Fig 3
AE 1640 DC	16	25	6	75	Brazed, Fig 3

Double cut allows for rapid stock removal in harder / tougher materials. The presence of the left hand flutes reduces the pulling action, which allows for better operator control. It reduces the size of the chips, and it can be used at slower than normal speeds.

DIAMOND CUT

Code	Tip Dia	Tip Length	Shank Dia	OAL	Construction
BD- 03-2	3	15	3	38	Solid, Fig 1
BD- 04-2	3	15	6	65	Brazed, Fig 2
BD- 06-2 SC	6	15	6	50	Solid, Fig 1
BD- 06-2	6	15	6	65	Brazed, Fig 3
BD- 08-2	8	19	6	69	Brazed, Fig 3
BD- 10-2	10	20	6	70	Brazed, Fig 3
BD-12-2	12	20	6	70	Brazed, Fig 3
BD- 1225-2	12	25	6	75	Brazed, Fig 3
BD- 1640-2	16	25	6	75	Brazed, Fig 3

This cut also has an additional left hand teeth pattern which are close enough to form a cutting teeth to look like a pyramid / diamond. The diamond cut is very effective in heat treated and tough alloy steels, producing extremely small chips. It offers very good operator control with good stock removal at the sacrifice of finish.

NF CUT

ALUMINUM CUT

STEEL CUT

INOX CUT

SB

Burs / SB