- Home
- SC
SC
Burs / SC
Cylindrcial Radius End Cut
- SCTI SC
- Solid carbide 1/4" sizes and below, brazed construction over 1/4"
- Inch and metric sizes
- Single, double, fine and shear cuts available
| Code | Tip Dia | Tip Length | Shank Dia | OAL | Construction |
|---|---|---|---|---|---|
| B 0312 | 3 | 15 | 3 | 38 | Solid, Fig 1 |
| B 0414 | 3 | 15 | 6 | 65 | Brazed, Fig 2 |
| B 0616 SC | 6 | 15 | 6 | 50 | Solid, Fig 1 |
| B 0616 | 6 | 15 | 6 | 65 | Brazed, Fig 3 |
| B 0820 | 8 | 19 | 6 | 69 | Brazed, Fig 3 |
| B 1022 | 10 | 20 | 6 | 70 | Brazed, Fig 3 |
| B 1224 | 12 | 20 | 6 | 70 | Brazed, Fig 3 |
| B 1225 | 12 | 25 | 6 | 75 | Brazed, Fig 3 |
| B 1640 | 16 | 25 | 6 | 75 | Brazed, Fig 3 |
Single cut is a general purpose tool designed for cast iron, steel, some copper and brass, and other ferrous materials. It will give good material removal and good workpiece finish.
| Code | Tip Dia | Tip Length | Shank Dia | OAL | Construction |
|---|---|---|---|---|---|
| B 0312 DC | 3 | 15 | 3 | 38 | Solid, Fig 1 |
| B 0414 DC | 3 | 15 | 6 | 65 | Brazed, Fig 2 |
| B 0616 SC DC | 6 | 15 | 6 | 50 | Solid, Fig 1 |
| B 0616 DC | 6 | 15 | 6 | 65 | Brazed, Fig 3 |
| B 0820 DC | 8 | 19 | 6 | 69 | Brazed, Fig 3 |
| B 1022 DC | 10 | 20 | 6 | 70 | Brazed, Fig 3 |
| B 1224 DC | 12 | 20 | 6 | 70 | Brazed, Fig 3 |
| B 1225 DC | 12 | 25 | 6 | 75 | Brazed, Fig 3 |
| B 1640 DC | 16 | 25 | 6 | 75 | Brazed, Fig 3 |
Double cut allows for rapid stock removal in harder / tougher materials. The presence of the left hand flutes reduces the pulling action, which allows for better operator control. It reduces the size of the chips, and it can be used at slower than normal speeds.
| Code | Tip Dia | Tip Length | Shank Dia | OAL | Construction |
|---|---|---|---|---|---|
| BD- 03-2 | 3 | 15 | 3 | 38 | Solid, Fig 1 |
| BD- 04-2 | 3 | 15 | 6 | 65 | Brazed, Fig 2 |
| BD- 06-2 SC | 6 | 15 | 6 | 50 | Solid, Fig 1 |
| BD- 06-2 | 6 | 15 | 6 | 65 | Brazed, Fig 3 |
| BD- 08-2 | 8 | 19 | 6 | 69 | Brazed, Fig 3 |
| BD- 10-2 | 10 | 20 | 6 | 70 | Brazed, Fig 3 |
| BD-12-2 | 12 | 20 | 6 | 70 | Brazed, Fig 3 |
| BD- 1225-2 | 12 | 25 | 6 | 75 | Brazed, Fig 3 |
| BD- 1640-2 | 16 | 25 | 6 | 75 | Brazed, Fig 3 |
This cut also has an additional left hand teeth pattern which are close enough to form a cutting teeth to look like a pyramid / diamond. The diamond cut is very effective in heat treated and tough alloy steels, producing extremely small chips. It offers very good operator control with good stock removal at the sacrifice of finish.
| Code | Tip Dia | Tip Length | Shank Dia | OAL | Construction |
|---|---|---|---|---|---|
| B 0616 NF | 6 | 15 | 6 | 65 | Brazed, Fig 3 |
| B 0820 NF | 8 | 19 | 6 | 69 | Brazed, Fig 3 |
| B 1022 NF | 10 | 20 | 6 | 70 | Brazed, Fig 3 |
| B 1224 NF | 12 | 20 | 6 | 70 | Brazed, Fig 3 |
| B 1225 NF | 12 | 25 | 6 | 75 | Brazed, Fig 3 |
It is a very coarse cut and finds applications for softer metals – like bronze, brass, aluminium etc. It is a rudimentary enhancement over a single cut. It has a very high material removal rate.
Coming Soon
Coming Soon
Coming Soon