SM

SINGLE CUT

DOUBLE CUT

DIAMOND CUT

NF CUT

ALUMINUM CUT

STEEL CUT

INOX CUT

SINGLE CUT

Code	Tip Dia	Tip Length	Shank Dia	OAL	Construction
K 0312	3	10	3	38	Solid, Fig 1
K 0616	6	19	6	59	Brazed, Fig 3
K 0616 SC	6	16	6	50	Solid, Fig 1
K 0818	7.5	11	6	61	Brazed, Fig 3
K 1020	10	20	6	70	Brazed, Fig 3
K 1220	12	25	6	75	Brazed, Fig 3

Single cut is a general purpose tool designed for cast iron, steel, some copper and brass, and other ferrous materials. It will give good material removal and good workpiece finish.

DOUBLE CUT

Code	Tip Dia	Tip Length	Shank Dia	OAL	Construction
K 0312 DC	3	10	3	38	Solid, Fig 1
K 0616 DC	6	19	6	59	Brazed, Fig 3
K 0616 DC	6	16	6	50	Brazed, Fig 3
K 0818 DC	7.5	11	6	61	Brazed, Fig 3
K 1020 DC	10	20	6	70	Brazed, Fig 3
K 1220 DC	12	25	6	75	Brazed, Fig 3

Double cut allows for rapid stock removal in harder / tougher materials. The presence of the left hand flutes reduces the pulling action, which allows for better operator control. It reduces the size of the chips, and it can be used at slower than normal speeds.

DIAMOND CUT

Code	Tip Dia	Tip Length	Shank Dia	OAL	Construction
KD- 03-2	3	10	3	38	Solid, Fig 1
KD- 06-2	6	19	6	59	Brazed, Fig 3
KD-06-2 SC	6	16	6	50	Solid, Fig 1
KD- 08-2	7.5	11	6	61	Brazed, Fig 3
KD- 10-2	10	20	6	70	Brazed, Fig 3
KD- 12-2	12	25	6	75	Brazed, Fig 3

This cut also has an additional left hand teeth pattern which are close enough to form a cutting teeth to look like a pyramid / diamond. The diamond cut is very effective in heat treated and tough alloy steels, producing extremely small chips. It offers very good operator control with good stock removal at the sacrifice of finish.

NF CUT

Code	Tip Dia	Tip Length	Shank Dia	OAL	Construction
K 1020 NF	10	20	6	70	Brazed, Fig 3
K 1220 NF	12	25	6	75	Brazed, Fig 3

It is a very coarse cut and finds applications for softer metals – like bronze, brass, aluminium etc. It is a rudimentary enhancement over a single cut. It has a very high material removal rate.

ALUMINUM CUT

STEEL CUT

INOX CUT

SM

Burs / SM